Tony posted his reply to “What’s on Your Breadboard” over the weekend. He says that it is an AVR-based LED scanner: “I started out using my standard jumpers but then went crazy with the too-long version.”
Every maker that dabbles in electronics has a breadboard or two (or three, or fourteen) with current and prior projects on them. In the spirit of sharing with our community, we asked on the email list a simple question: “What’s on your breadboard?”
Over the next few days, we’re going to feature some of the replies here on the blog.
First up is Workshop 88 member Karl who shared a photo of his breadboard with an array of LEDs on it. His project is developing a countdown timer with a visual representation given by the LEDs. He pointed out the button which never seems to stay on the breadboard.
Thanks for sharing, Karl!
What’s on your breadboard?
Jim updated his post to his own blog to include some measurements of the effect of breaking the magnet to get the wire wrapped on to it.
He used a simple RL circuit to measure the inductance of the toroid. Very neat to see some values to compare the glued vs. unbroken magnets.
Are you looking to get more involved with Workshop 88 beyond this blog?
We have LOTS of ways that our members interact with each other online.
Here are a few ways:
Email list – join our Google group – You must subscribe to this to see the messages. (We approve everyone who is not a spambot.)
Twitter – Follow @Workshop88
Facebook – like us on Facebook
Email – Send an email to “info @ workshop88.com”
Chat room – Members often get together during the work week to chat online
Last night was a great turnout for the Public Meeting at Workshop 88. Over a dozen makers came out to work on various projects and learn new things at the space.
Our friend Tom M from the Fox Valley ASME chapter came out and had a small part for his project printed on the 3D printer:
We’ve been doing a lot of 3D printing recently at Workshop 88. Many times we just download models from Thingiverse, but more and more we are designing our own models.
Using Sketchup is one way that models can be created, but sometimes when you print a complicated model as designed in Sketchup, there are pieces of the model which are missing.
There is a tutorial available for this Sketchup plugin which allows you to find holes or reversed faces in your models. Recently, there was a model designed which failed to print correctly. When using the CADspan plugin, it was discovered that many of the faces were reversed:
The red faces are the ones that needed to be corrected. A few right-clicks later and the model was fixed:We’d love to know your tips and tricks for getting better prints from your own designs. Let us know!
Inspired by Kirk and the Kobayashi Maru, when Jim was faced with the near-impossible task of winding hundreds of turns of wire through a toroid core, he cheated. 🙂
By cleanly breaking the core in half and gluing one half to a spindle chucked in an electric drill, the winding became fairly easy. Super gluing the halves together afterward produced a magnetically and physically sound toroid again.
Several folks at the space helped Jim with his experiment, holding wire, counting turns, operating the drill, and of course taking pictures. Many thanks to Ti Leggett for his efforts and skills as the photographer. There are more details in Jim’s project notes, but here’s the video:
We would like to plan the March classes that we will offer at Workshop 88. What classes would you be interested in taking? Most classes would cost $25 (+ materials).
Let us know by answering the poll on our meetup page.
Want to follow the schedule of open hack nights? Check out our meetup page: www.meetup.com/workshop88