CAD CAM tutorial

CAD CAM tutorial
by D.  Scott Williamson

This tutorial will show you how to use Computer Aided Design and Computer Aided Manufacturing or CAD CAM tools to create and preview a Gcode file of the Workshop 88 logo that can be run in a 3 axis CNC Mill.

Background

There are 5 main types of machine operations

  1. Engrave (follow path): The tool tip will follow the 3D path provided.
  2. Profile: The tool edge will follow either the inside or outside contour of a path down to the specified depth.
  3. Pocket: The tool will remove all the material within a contour down to the specified depth.
  4. Drill: A drill routine will be executed at each point location.  Drill routines come in 2 flavors:
    1. “Peck” used with drill bits, drills to successively deeper depths liftig the bit out of the work regularly to clear chips from the flutes.
    2. “Spiral” used with endmills that are a smaller diameter than the finished hole.
  5. 3D relief: The tool tip will remove material above a 3D surface usually specified in a 3D model or a 2D height map image.  There are two main modes:
    1. “Waterline” similar to inverted pocket operations where bulk material is efficiently removed outside the 3D model to a number of stepped depths resembling waterline in a topological map.  Typically used in a first pass with a large roughing bit to remove the bulk of the material.
    2. “Raster” moves the tip of the bit smoothly over the model in a raster pattern.

Gcode is a “numerically controlled programming language” which is why a Gcode file extension is typically .nc.  It is a human and machine readable text file.  You will rarely if ever need to look at or edit the Gcode.

Overview

This tutorial will demonstrate Engrave, Profile, and Pocket operations, which are the most popular.

There are 4 steps to this tutorial:

  1. Create a .svg file containing paths needed for machine operations
  2. Create machine operations
  3. Export Gcode
  4. Simulate, visualize and validate

Continue reading

Last Thursday night @ Workshop 88

biff-setting-up-the-radio-jim-working-andrew-watching-scaled
Last Thursday we had quite a bit going on at the weekly open house:

Ray connected the chassis of a motorized wheelchair to a remote control unit and was able to drive it around the front room.  Here’s a video:

The laser cutter was being used extensively to cut out some tesselating lizards and geckos, as well as to make stencils for an ammo box intended to hold plastic eggs. The project is called “Hen Grenades”.

Later in the evening Rachel came in and showed off her new LEGO compatible circuit boards – they are really awesome!  We were having so much fun playing with them that no one remembered to take photos.  Come in next week and ask her about them!