Stuff for making stuff: PETG filament


AFFILIATE LINK BELOW – CLICKING THROUGH SUPPORTS WORKSHOP 88

END AFFILIATE LINK HERE – IF YOU DON”T SEE ANYTHING, TRY DISABLING ADBLOCKER


Have you tried 3D printing with PETG filament instead of PLA or ABS? A few of Workshop 88’s experts in 3D printing swear by PETG for most of their prints – here’s why:

  1. PETG is durable and heat-tolerant like ABS is. PLA has the reputation of being a bit more brittle than ABS. PLA also tends to warp under moderate heat – no leaving PLA components inside a car on a hot summer day, for example.
  2. PETG is easy to print like PLA. PLA does not have the thermal expansion issues that ABS has, which tends to cause ABS to curl up off of the print bed.
  3. PETG is affordable. Check out the (affiliate) links above and below which support Workshop 88.

AFFILIATE LINK BELOW – CLICKING THROUGH SUPPORTS WORKSHOP 88

END AFFILIATE LINK HERE – IF YOU DON”T SEE ANYTHING, TRY DISABLING ADBLOCKER


Leave a Reply