Recently one of our members shared that one of her 3d prints stuck a little too well to the bed and then the bed chipped when trying to pull the print off.
The filament used was PLA, and the bed was prepped with a bit of hairspray before printing. Other members here at Workshop 88 use isopropyl alcohol to prep their printer beds before printing with PLA.
The advantage of using glass is that the surface is extremely flat and smooth. Just let this be a cautionary tale that there is some risk of chipping the glass if the print adheres too much. But if you know how to cut glass yourself, you can always make a new one!
One of our members, Mark Frost, recently made up some custom awards for a group at his church. Here’s what he had to say about this project:
Every summer for 30+ years some guys from church have been doing a golf trip. I’ve been going for the last 15years or so and have recently taken over the “hardware” aspect. In previous years we would order engraves plaques, mugs, glasses, embroidered towels, etc. But this year I figured I’d take production “in-house”. I grabbed the church and resort logos, threw the text on top and engraved squares I cut from a 2’x2′ MDF board from HD
Mark Frost via slack.com
This is a really great example of the kinds of projects that our members are able to create quickly at Workshop 88! What could you make with a laser cutter/engraver?
One of the challenging aspects for getting visitors to Workshop 88 is that our location is not obvious for first-time attendees. We have long joked that if you made it to our door, you must be the type of person who belongs at a makerspace, because sometimes it can seem like you really have to want to find us in order to get to Workshop 88.
Of course, we want everybody to be able to find Workshop 88! One of our members, Gail, has taken the initiative to make some signs for various uses at Workshop 88.
One sign was made with a 3d printed logo and also has solar lights attached to it for illuminating the sign after the sun sets. The other sign was made with one of our vinyl cutters and is used to direct people in for classes.
If you’re in the downtown Glen Ellyn area on Thursday evenings, you are likely to see at least one of these signs welcoming you in to our open house hours. Please stop by!
This week we introduced a new tool to the Workshop 88 inventory – a heat press for making custom t-shirts, mugs, hats, plates, and anything else that you can put heat transfer material on.
As you can see from the brief video above, we also tried out some laserable heat transfer material. Probably more testing is needed, but after a bit of clean-up on the shirt, it was deemed a successful trial.
Here’s a video showing the features and how to use the heat press:
What would you make with Workshop 88’s heat press? Come to our open house and find out more about becoming a member of our community!
AFFILIATE LINK BELOW – CLICKING THROUGH SUPPORTS WORKSHOP 88
END AFFILIATE LINK HERE – IF YOU DON”T SEE ANYTHING, TRY DISABLING ADBLOCKER
This is one of the best power adapters you can get for running your Raspberry Pi projects. Why? The built-in power button for easy cycling on and off of your Raspberry Pi while you are building your latest and greatest project with it. This is easily one of the best upgrades you can make to any of your RasPi builds – no more unplugging and replugging the USB adapter!