Workshop 88 Weekly Maker Night – December 1st, 2020

This Week’s Project Discussions

  • Radiosonde Update [Phil]
    • radiosonde is an automatic radio transmitter in the meteorological aids service usually carried on an aircraft, free balloon, kite or parachute, and which transmits meteorological data. Each radio transmitter shall be classified by the radiocommunication service in which it operates permanently or temporarily.
  • The live cracking open to see “Clear Ice” Molds Project [Scott]
  • Home Automation
    • New UPS hack [Jim]
    • Mailbox [Peter]
    • Integrating an old (UL Certified) workhorse (X10 Modules) into a modern home automation system [Rick]
  • 3D Printing projects
    • Holiday
    • General
  • Useful Tools and inventions to use in the workshop
  • Slack/Blog Postings Review
    • Melamine or chipboard drawer face repair [Scott]

Welcome to the Workshop 88 Makers Round-table on Zoom where we share our projects, ideas, and related resources. The agenda is above, the meeting will be recorded and hosted on YouTube, and resources like links and other related information can be found here after the event. To bring your own topic, join Workshop88 or become a supporter via Patreon.

Meeting notes

Please subscribe to Workshop88’s YouTube page, like us on facebook, and join or support our maker community by contributing to our Patreon.

Workshop 88 is a makerspace in Glen Ellyn Illinois. We are more than a workshop, we are a growing community of creative talented people who aspire to learn and share their insights, experiences, and projects.

Please subscribe to Workshop88’s YouTube channel, like us on facebook, and join or support our maker community by contributing to Workshop88 on Patreon!

To find out about upcoming events follow Workshop88 on Meetup.
Do you have a question? email us at info@Workshop88.com

Workshop 88 Weekly Maker Night – November 11, 2020

Introduction

Workshop 88 is a makerspace in Glen Ellyn Illinois. We are more than a workshop, we are a growing community of creative talented people who aspire to learn and share their insights, experiences, and projects.

Please subscribe to Workshop88’s YouTube channel, like us on facebook, and join or support our maker community by contributing to Workshop88 on Patreon!

To find out about upcoming events follow Workshop88 on Meetup.
Do you have a question? email us at info@Workshop88.com

Welcome to the second Workshop 88 Makers Round-table in a row on Zoom where we plan to share our projects, ideas, and related resources. The attendees and agenda are below, the meeting will be recorded and hosted on YouTube, and resources like links and other related information can be found here after the event.

Attendees

  • Andrew Morrison
  • Scott Williamson
  • Jim Williams
  • Tom Matukas
  • Gail Jo Kelly
  • Daniil Bystrukhin
  • Peter Fales
  • Phil Strons
  • Karl Knutson
  • Christine Heermann

Show & tell time!

Each session will target 10 minutes for show and tell and 5 minutes for Q&A

7:05pm – Scott recently explored Free and Open Source video editing software and will share his findings including resurrecting an antique and finding a real gem!

7:20pm – Jim will share laser cut fluorescent non-round gears

General discussion topics

  • Home Automation (ESP-01, ESP-32, Arduino, WiFi, MQTT, Mosquito, Raspberry Pi, Linux, battery/solar power…)
    • Daniil and Peter shared a lot of detailed information about the hardware, protocols, software they use to monitor and control many things around their homes – links below.
  • “What are you 3D printing?”
    • Andrew shared hexagonal tangram-like puzzle he designed in TinkerCAD and 3D printed. We discussed additional puzzles and ways to improve the puzzle and print quality.
  • “What are you making / preparing for the holidays?”

Meeting notes

Please subscribe to Workshop88’s YouTube page, like us on facebook, and join or support our maker community by contributing to our Patreon.